1. When laying the aluminum silicate fiber blanket, the veneer faces the indoor side and is perpendicular to the purlin. Leave an extra 20 cm roll of felt at one eaves, and fix it on the outermost purlin with a special clamp or double-sided tape.
2. Ensure alignment and tension when unwinding, lay ceramic fiber blankets on other eaves, leave an extra 20 cm roll blanket, and fix it on the outermost purlin with special clamps or double-sided tape.
3. Tie the two rolls of cotton cloth to the veneer with a stapler, and connect the two rolls of cotton cloth together.
4. Use the color steel plate on the roof of the equipment, remove the special fixture at the eaves, and use the reserved 20 cm veneer as the edge of the glass wool.
