Ceramic fiber board is a fiberboard product with certain strength and hardness, which is formed by pressing or vacuum suction filtration and dried. Widely used in electric power, metallurgy and other industries. Melting is also very complicated due to the good service properties of ceramic fiber board, which maintains mechanical strength even after heating. Let's take a look at the specific melting process of ceramic fiber board:
1. The melt of the ceramic fiber board is discharged to the outside through the furnace mouth.
2. The work of the resistance furnace is to complete the dynamic balance of each point. The resistance furnace operates stably, with high thermal efficiency and good fiber quality.
3. Continuously feed into the furnace, continuously melt the charge, continuously discharge the melt out of the furnace for fiberization, and then reach the melting process of the ceramic fiber board
4. During operation, the resistance furnace dips the metal electrodes into the molten material. When a strong current passes through the molten material of the electrode and the ceramic fiber board, the molten material will continuously generate a lot of heat due to its own resistance, and then gradually melt the charge in the high temperature zone of the furnace.
The introduction of its melting process is believed to be familiar to everyone. The ceramic fiber board can directly contact the flame, is resistant to high-speed airflow erosion, has strong wind erosion resistance, and the thickness is proportional to the bulk density, which is convenient for construction.
